Length: 250 cm

Width: 25 cm

Height: 90 cm

Weight: Approx. 35 kg

Speed (Max.): 20 km/hr.

Range: Approx. 15-50 km depending on road and snow condition

Drag Force: Approx. 90 kgF

Inclination Range: 15-20% with 90 kg rider weight

No. of Battery: 1

No. of Motor: 1

Battery: 48V / 17.5 Ah Li-Ion battery

The Lizard battery is a battery you can mount on the bike’s frame 2 water bottle bolt mount. This is the thinnest battery case for suspension frames or small size frames. Check the bicycle frame down tube geometry then select.  The battery can be locked to its support or un-lock and slide out to remove.

• Li-Ion 48V  17.5Ah
• Energy: 840Wh
• Max Power: 1200W
• Standard recharge time 8 hours

Battery Pack Specification:

• PVC covered 18650Cells and BMS pack
• SANYO GA 3500
• Charging Model CC/CV
• Charge Temperature 0-45°C
• Discharge Temperature -20-55°C
• Charger Voltage: 54.6V
• 4.5kg
• Dimensions 370 x 110 x 90 mm

Motor: 750W Rated (1200W Max.) Geared Motor

1200W using 48V 25A controller, hub motor, small size with simple structure, lightweight and long life, superpower, high efficiency, beautiful, high-speed motor with gear, the drive is very free and fluent, the best choice for Li-ion battery on an e-bike for the rough road, higher weights and higher grade-ability.

• Motor Type: DC Brushless Geared Hub Motor
• Motor Power: 750W /1200W
• Voltage: 48V
• Max Torque: 120Nm @25A
• Efficiency ≥80%
• Sun-planetary reduction gears with regenerative braking option
• 36 Spokes
• Flange for disc brake
• Waterproof connector
• Axle=135mm, Diameter=177mm.
• Weight=4kg
• The phase angle of 120 degree
• Manufacturer: MXUS
• Waterproof and protection grade: IP54
• Noise level 55dB
• CE, EN15194 certifications

Material:

• Wheel, A356 Aluminum
• Magnet, 38SH
• Wire(winding), QZ-3/155
• Iron core, DW470
• Bearing, C&U

Display Computer

• LCD3 meter provides you with a variety of functions such as vehicle controls and vehicle status digitized displays to meet the trip demands.
• Pedal Assist System (PAS) optimized to simulate the torque sensor. This computing system provides Speed limit PAS or Torque limit PAS levels from 0 to 5.
• Trip time display (with displays of a single trip time (TM) and total trip time (TTM));
• Trip speed display (with displays of real-time speed (Km/H or MPH) and a single maximum speed (MXS) and a single average speed (AVS));
• Trip distance display (with displays of a single trip distance (DST) and total trip distance (ODO));
• Display of turned on the handlebar;
• Display of power-assist startup;
• Power assistant ratio (or handlebar) gear (ASSIST) switch;
• 6Km/H power assistant push function;
• Cruise function (CRUISE);
• Battery capacity indicator;
• Real-time battery voltage (VOL) display;
• Motor power and temperature (MOTOR) display;
• Brake display;
• Turn on backlighting and lights ;
• Environment temperature display;
• Data clearing;
• Fault code display;
• User parameter setting
• 5′ large screen
• Rubber clamp spacer is provided for 3 handlebars bore sizes: 22.5mm, 25.4mm, 31.5mm
• Easy key button, easy control,
• Waterproof housing with good appearance

Motor Controller:

• Brushless Motor Controller
• Voltage: 48V
• Min Voltage: 42+-0.5V
• Max Current: 25+-1A
• Speed Set: 1-4.2V
• Angle: 120
• Brake Input: Low-Level

Thumb Throttle:

• Haul effect sensor, Analogue linear increasing torque

Pedal Assist Sensor

• 2 pieces 12 Magnet easy assemble Pedal Assist Sensor,
• Just stick the sensor, no need to disassemble the crank.
• this sensor is compatible with optimized PAS controlling systems and provides the best pedal assist performance, rapid response and torque sensor simulation.

Brake Cut-Off Magnetic Switches

• Just stick the magnet sensors, no need to disassemble the brake levers.
• it cuts-off the motor when you brake
• Electric regenerative braking

Rainproof Controller and Tool Bag